+7 (812) 645-08-06
Oil filters
select brand
Oil filtration unit / independant - max. 4 bar, max. 45 l/min, max. 5 000 l | FNA 045
The FNA 045 Off-line Filter Units of Argo Hytos is specifically used in the off-line circuits of hydraulic and lubricating oil systems. It has an operating pressure of up to 4 bar (58 psi), a nominal flow rate of up to 45 l/min (12 gpm), and tank capacities...
Oil filtration unit / independant - max. 4 bar, max. 45 l/min, max. 5 000 l | FNA 045
The FNA 045 Off-line Filter Units of Argo Hytos is specifically used in the off-line circuits of hydraulic and lubricating oil systems. It has an operating pressure of up to 4 bar (58 psi), a nominal flow rate of up to 45 l/min (12 gpm), and tank capacities of up to 5.000 l (1.300 gl). Its robust design features a fold-out handle at the cover facilitate opening. Pipes aren't required except on connection lines because the the filter element can be replaced without losing any oil. The device has reduced noise output and low power consumption. To protect the unit from overload, an integreted pressure relieif valve ensures that the dirt in the filer is eliminated together with the element. The filter element of the unit has a flow direction going from the center to the outside. It is capable of low pressure drop, high dirt-holding capacities, and long service life. Furthermore, a clogging indicator indicates the correct moment for maintenance.
Oil filtration unit / independant - max. 8 bar, max. 40 l/min, max. 5 000 l | FNA 040-553
The FNA 040-553 off-line filter unit features an operating pressure of up to 8 bar or 116 psi and a nominal...
Oil filtration unit / independant - max. 8 bar, max. 40 l/min, max. 5 000 l | FNA 040-553
The FNA 040-553 off-line filter unit features an operating pressure of up to 8 bar or 116 psi and a nominal flow rate of up to 40 l/min or 10.6 gpm. The product can hold up to 5000 l of tank volumes. For its operation, the unit is independent on the working cycles of the system and can be used as an additional off-line filter unit or as a sole system filter for continuous improvement of the oil cleanliness.
Oil filtration unit / independant - max. 4 bar, max. 8 l/min, max. 1 500 l | FNA 008
FNA 008 features off-line filters equipped with flow control valve operating at a maximum pressure of 4 bar (58 psi), tank capacities of up to 1.500 l and a normal...
Oil filtration unit / independant - max. 4 bar, max. 8 l/min, max. 1 500 l | FNA 008
FNA 008 features off-line filters equipped with flow control valve operating at a maximum pressure of 4 bar (58 psi), tank capacities of up to 1.500 l and a normal flow rate of up to 8 l/min (2.1 gpm).
These filters are built with protection against corrode through extremely fine filter components that satisfy the requirements for dirt-holding capacity and cleanliness classes. These also have malfunction security through fixed filtration in the off-line circuits resulting to optimum cleanliness classes.
FNA 008 is best suited for application in off-line filtration in lubricating and hydraulic oil systems.
These filters are built with protection against corrode through extremely fine filter components that satisfy the requirements for dirt-holding capacity and cleanliness classes. These also have malfunction security through fixed filtration in the off-line circuits resulting to optimum cleanliness classes.
FNA 008 is best suited for application in off-line filtration in lubricating and hydraulic oil systems.
Oil filtration unit / off-line / independant - max. 320 bar, 6 l/min, 350 ml | FNS 040-105
The FNS 040-105 off-line filter is used to filter permanently solid particles and water from hydraulic oil. The manometer displays the clogging of filter element. The FNS off-line filter...
Oil filtration unit / off-line / independant - max. 320 bar, 6 l/min, 350 ml | FNS 040-105
The FNS 040-105 off-line filter is used to filter permanently solid particles and water from hydraulic oil. The manometer displays the clogging of filter element. The FNS off-line filter uses a flow control valve to connect to a high pressure pipe with an inlet pressure of up to 320 bar (minimum inlet pressure approx. 20 bar). Depending upon the inlet pressure, the flow rate is kept constant at approx. 6 l/min. The filter offers a nominal flow rate of approx. 6 l/min, up to 320 bar operating pressure and approx. 350 ml water capacity. The filter offers simple retrofitting with high component protection, higher availability and longer machine lifetime. Downtime is minimized due to contamination
Oil filtration unit / off-line / independant - max. 320 bar, max. 4 l/min | FNS 060
FNS 060 features off-line filters equipped with flow control valve operating at a maximum pressure of 320 bar (4640 psi), and...
Oil filtration unit / off-line / independant - max. 320 bar, max. 4 l/min | FNS 060
FNS 060 features off-line filters equipped with flow control valve operating at a maximum pressure of 320 bar (4640 psi), and a normal flow rate of up to 4 l/min (1.06 gpm).
These filters are built with protection against corrode through extremely fine filter components that satisfy the requirements for dirt-holding capacity and cleanliness classes. These also have malfunction security through fixed filtration in the off-line circuits resulting to optimum cleanliness classes.
These filters are built with protection against corrode through extremely fine filter components that satisfy the requirements for dirt-holding capacity and cleanliness classes. These also have malfunction security through fixed filtration in the off-line circuits resulting to optimum cleanliness classes.
Oil filter / self-cleaning - 40 - 1 100 m³/h | Alfa Laval
The Alfa Laval automatic lube and oil filter systems were designed to filter lubricating oils used in crosshead engines and trunk pistons. This prevents contaminants from entering some of the most sensitive parts of the...
Oil filter / self-cleaning - 40 - 1 100 m³/h | Alfa Laval
The Alfa Laval automatic lube and oil filter systems were designed to filter lubricating oils used in crosshead engines and trunk pistons. This prevents contaminants from entering some of the most sensitive parts of the engine, which will reduce engine wear and boost durability.
The space-saving and compact design makes it easy to retrofit and install as an upgrade to a previously installed system. The three main types of Alfa Laval lube oil filters all have an automatic backflushing system.
The X type is used with crosshead engine, the T type with trunk piston engines and the Combined Cleaning Unit (CCU) with trunk piston engines that operate up to 5,000kW. Some of the T and X models come with a special diversion chamber that will collect particles coming from the full-flow chamber which makes it a maintenance-free sludge treatment system.
The space-saving and compact design makes it easy to retrofit and install as an upgrade to a previously installed system. The three main types of Alfa Laval lube oil filters all have an automatic backflushing system.
The X type is used with crosshead engine, the T type with trunk piston engines and the Combined Cleaning Unit (CCU) with trunk piston engines that operate up to 5,000kW. Some of the T and X models come with a special diversion chamber that will collect particles coming from the full-flow chamber which makes it a maintenance-free sludge treatment system.
Coolant filter / for machine tools / industrial - 50 - 400 l/min | DETEX series
The Detex is suitable for fine metal machining processes producing both magnetic and...
Coolant filter / for machine tools / industrial - 50 - 400 l/min | DETEX series
The Detex is suitable for fine metal machining processes producing both magnetic and non magnetic particles. This kind of system is suitable for the purification of neat or soluble oil with contaminated both by magnetic and non magnetic particles. It allows to choose the degree of filtration from 10 to 50 microns.
Coolant filter / for machine tools - 15 - 30 l/min | DTE 30 series
The DTE 30 series of coolant filters utilize a filter cloth system to purify neat and soluble oils from...
Coolant filter / for machine tools - 15 - 30 l/min | DTE 30 series
The DTE 30 series of coolant filters utilize a filter cloth system to purify neat and soluble oils from magnetic and non-magnetic contaminants. Its system enables a filtration rate ranging from 10 to 50 microns, with minimal starting investment required.
The range is specially optimized for use in machining operations that call for detailed lathe, swarf, grinder and machining center removal.
The range is specially optimized for use in machining operations that call for detailed lathe, swarf, grinder and machining center removal.
Coolant filter / for water / stainless steel / coolant - 25 - 400 l/min | DETEX STAINLESS STEEL series
Current : 1.16 A - 5.8 A
Voltage : 230 V - 460 V
Operating pressure : 0.1 bar - 100 bar
Detex Stainless Steel is a coolant filter that conducts the task of filtering with the help of cloth for the elimination of magnetic and/or non-magnetic particles that pollute miscible or immiscible...
Voltage : 230 V - 460 V
Operating pressure : 0.1 bar - 100 bar
Detex Stainless Steel is a coolant filter that conducts the task of filtering with the help of cloth for the elimination of magnetic and/or non-magnetic particles that pollute miscible or immiscible...
Coolant filter / for water / stainless steel / coolant - 25 - 400 l/min | DETEX STAINLESS STEEL series
Detex Stainless Steel is a coolant filter that conducts the task of filtering with the help of cloth for the elimination of magnetic and/or non-magnetic particles that pollute miscible or immiscible oil. The presence of filtering cloth vouches for best possible purifying to the impressive extent of 10 to 50 microns. This equipment calls for minimal investment and optimal results. Various mechanical processes comply with these coolant filters and deftly handle various mechanical processes like elimination of lathes, grinders, swarf, grinders, etc. It is made up of quality stainless steel and renders best possible purification of liquid emulsions, water, corrosive/salty liquids, chemicals, etc., pertaining to food, pharmaceutical or chemical industries.
Coolant filter / for machine tools - 15 - 400 l/min | DECOM series
For magnetic and non magnetic particles, DECOM, a combined filtration system, can...
Coolant filter / for machine tools - 15 - 400 l/min | DECOM series
For magnetic and non magnetic particles, DECOM, a combined filtration system, can filter from 50 to 400 L/min and 25 to 200 L/min, respectively. It is available in 7 models, and there are available options such as an oil mist filter, pumps for the delivery of clean coolant with pressure in the range of 0.1 bar to 100 bar.
Mobile oil filter unit - 2 - 3 µm | SUPERFILTER series
The super filtration unit, SUPERFILTER by losma features the capacity of fine filtration upto 3 microns and a good capacity of build...
Mobile oil filter unit - 2 - 3 µm | SUPERFILTER series
The super filtration unit, SUPERFILTER by losma features the capacity of fine filtration upto 3 microns and a good capacity of build up, which hence is beneficial to the end user, along with lower costs of maintenance and operation, progress in productivity durability of the mechanical components that is the by pass and in line filters as well. The device is best suited for applications involving maintenance of coolant in operations which include lubricating oil, hydraulic oil, oil from tempers and oil from gears.