+7 (812) 645-08-06
VCO oscillators, SAW oscillators, other oscillators...
select brand
VCO oscillator / VCO / phase-locked loop / PLL - 74HC, HEF4046 series
A phase locked loop (PLL) is a feedback system that synchronizes an oscillator to the phase and frequency of an incoming...
VCO oscillator / VCO / phase-locked loop / PLL - 74HC, HEF4046 series
A phase locked loop (PLL) is a feedback system that synchronizes an oscillator to the phase and frequency of an incoming signal. The PLL consists of a phase comparator, loop filter and voltage controlled oscillator (VCO).
Key features and benefits
Wide supply voltage 3.0 to 6.0 V
Max. frequency up to 17 MHz (typ.)
Low power consumption
Excellent VCO frequency linearity
Choice of phase comparators
User configurable
Key features and benefits
Wide supply voltage 3.0 to 6.0 V
Max. frequency up to 17 MHz (typ.)
Low power consumption
Excellent VCO frequency linearity
Choice of phase comparators
User configurable
VCO oscillator / phase-locked loop / VCO / PLL - 12.8 - 13.05 GHz | TFF10xx series
Better RF performance
Highly integrated, NXPs LO generators save board space and make design-in easier, for lower overall cost and faster development. We offer two series of LO generators: the TFF100xHN are optimized for VSAT applications, while the TFF11xxxHN are ideal in microwave radio. All the solutions have very low power dissipation (not exceeding 400 mW), and are available in a space-saving...
Highly integrated, NXPs LO generators save board space and make design-in easier, for lower overall cost and faster development. We offer two series of LO generators: the TFF100xHN are optimized for VSAT applications, while the TFF11xxxHN are ideal in microwave radio. All the solutions have very low power dissipation (not exceeding 400 mW), and are available in a space-saving...
VCO oscillator / phase-locked loop / VCO / PLL - 12.8 - 13.05 GHz | TFF10xx series
Better RF performance
Highly integrated, NXPs LO generators save board space and make design-in easier, for lower overall cost and faster development. We offer two series of LO generators: the TFF100xHN are optimized for VSAT applications, while the TFF11xxxHN are ideal in microwave radio. All the solutions have very low power dissipation (not exceeding 400 mW), and are available in a space-saving...
Highly integrated, NXPs LO generators save board space and make design-in easier, for lower overall cost and faster development. We offer two series of LO generators: the TFF100xHN are optimized for VSAT applications, while the TFF11xxxHN are ideal in microwave radio. All the solutions have very low power dissipation (not exceeding 400 mW), and are available in a space-saving...
Silicon oscillator - Si500D, Si500S​
Silicon oscillators manufactured by Silicon Labs provide comparable performance to crystal oscillators. By leveraging innovative stabilization circuitry, silicon...
Silicon oscillator - Si500D, Si500S​
Silicon oscillators manufactured by Silicon Labs provide comparable performance to crystal oscillators. By leveraging innovative stabilization circuitry, silicon oscillators eliminate the need to use a mechanical resonator (quartz, MEMs or SAW) and can exceed jitter performance typically suited for high-volume applications. This technology uses a standard CMOS IC manufacturing flow to enable short lead times for any frequency oscillator between 0.9 and 200 MHz. This simplified process flow also enables very cost-effective solutions, especially for applications that require higher frequencies and differential formats (LVPECL, LVDS and HCSL).
VCSO oscillator / voltage-controlled SAW - 150 - 1000 MHz | VS-709
The VS-709 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency from one of the two internal SAW filters. The SAW filters are...
VCSO oscillator / voltage-controlled SAW - 150 - 1000 MHz | VS-709
The VS-709 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency from one of the two internal SAW filters. The SAW filters are high-Q Quartz devices that enable the circuit to achieve low phase jitter performance over a wide operating temperature range. A divider circuit is deployed for output frequencies less than 600 MHz. The selectable dual oscillator is housed in a hermetically sealed leadless surface mount package and offered on tape and reel. It has a tri-state Frequency Select function that provides one of three conditions: Frequency 1, Output Disable, or Frequency 2.
VCSO oscillator / voltage-controlled SAW - 700 - 3000 MHz | VS-703
Vectron's VS703 Voltage Controlled SAW Oscillator (VCSO) is...
VCSO oscillator / voltage-controlled SAW - 700 - 3000 MHz | VS-703
Vectron's VS703 Voltage Controlled SAW Oscillator (VCSO) is a SAW stabilized, low phase noise, high frequency Oscillator with CML Compatible Outputs (fN 1.2 GHz), operating at 3.3 volt supply, hermetically sealed 5x7 ceramic package.
VCSO oscillator / voltage-controlled SAW - 800 - 2800 MHz | VS–501
Data converters (ADCs and DACs) need low phase noise clocks. As Data converters...
VCSO oscillator / voltage-controlled SAW - 800 - 2800 MHz | VS–501
Data converters (ADCs and DACs) need low phase noise clocks. As Data converters reach higher speed in wireless and 100G, high speed clocks with ultra low phase noise are required. The VS-501 provides ultra low phase noise in the 800MHz to 2.5GHz range, with noise floors as low as -164dBc/Hz.
Voltage-controlled SAW oscillator / VCSO - 1000 - 2500 MHz | VS–402
The VS402 dual frequency VCSO (Voltage Controlled Saw Oscillator) from Vectron is a high frequency,...
Voltage-controlled SAW oscillator / VCSO - 1000 - 2500 MHz | VS–402
The VS402 dual frequency VCSO (Voltage Controlled Saw Oscillator) from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G coherent optical receivers. The VS402 provides 12fs rms jitter in the 12kHz to 20MHz integration bandwidth and is available from 1.0GHz to 2.8GHz. Two frequencies are switchable.
Voltage-controlled SAW oscillator / VCSO - 1000 - 2500 MHz | VS–401
The VS-401 VCSO (Voltage Controlled Saw Oscillator) from Vectron is a high frequency,...
Voltage-controlled SAW oscillator / VCSO - 1000 - 2500 MHz | VS–401
The VS-401 VCSO (Voltage Controlled Saw Oscillator) from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G coherent optical receivers. The VS401 provides 12fs rms jitter in the 12kHz to 20MHz integration bandwidth and is available from 1.3GHz to 2.1GHz.