+7 (812) 645-08-06
Water purification for laboratory
select brand
Ultra-pure water purification unit for laboratories - 20 L | Select Fusion
The Select Fusion is purpose built for analytical and life science applications that need small volumes of ultrapure water to 18.2MΩ.cm from a mains supply, typically up to 50 litres per day, in addition to purified water for general laboratory use.
The self-contained, dual quality...
The self-contained, dual quality...
Ultra-pure water purification unit for laboratories - 20 L | Select Fusion
The Select Fusion is purpose built for analytical and life science applications that need small volumes of ultrapure water to 18.2MΩ.cm from a mains supply, typically up to 50 litres per day, in addition to purified water for general laboratory use.
The self-contained, dual quality system integrates pre-treatment, reverse osmosis, UV photo-oxidation, ion exchange and sub-micron filtration technology in a single, robust and compact enclosure. The Select Fusion is also available with EDI technology replacing the more traditional ion-exchange treatment.
A high contrast LCD shows system status, including water quality, TOC, temperature and flow rates. Visual and audible alarms are also included, while event data can be downloaded via a standard RS232 port.
The system provides take-off through either an ultrapure water dispenser or a separate bib tap. When it is not being used, water quality is enhanced by automatic recirculation.
The Select Fusion can be wall or bench mounted and is supplied with an installation kit and a full set of consumables. An optional boost pump is also available for areas with <4 bar feedwater pressure.
The self-contained, dual quality system integrates pre-treatment, reverse osmosis, UV photo-oxidation, ion exchange and sub-micron filtration technology in a single, robust and compact enclosure. The Select Fusion is also available with EDI technology replacing the more traditional ion-exchange treatment.
A high contrast LCD shows system status, including water quality, TOC, temperature and flow rates. Visual and audible alarms are also included, while event data can be downloaded via a standard RS232 port.
The system provides take-off through either an ultrapure water dispenser or a separate bib tap. When it is not being used, water quality is enhanced by automatic recirculation.
The Select Fusion can be wall or bench mounted and is supplied with an installation kit and a full set of consumables. An optional boost pump is also available for areas with <4 bar feedwater pressure.
Water purification unit laboratory - Select Analyst
The Select Analyst is ideal for everyday pure water laboratory tasks, including glassware rinsing, buffers and stains, reagent make-up, and media preparation.
Water purification unit laboratory - Select HP
The Select HP provides a consistent supply of high quality pure water, making it suitable for HPLC, ion chromatography, atomic absorption, and clinical analyser feed.
Water purification unit laboratory - 60 - 190 L/h | Integra HP
The Integra HP is a compact, mobile, centralised water purification and distribution unit. Fully integrated, it incorporates reverse osmosis, ion-exchange, carbon dioxide membrane degassing, ultra violet irradiation and bacterial filtration...
Water purification unit laboratory - 60 - 190 L/h | Integra HP
The Integra HP is a compact, mobile, centralised water purification and distribution unit. Fully integrated, it incorporates reverse osmosis, ion-exchange, carbon dioxide membrane degassing, ultra violet irradiation and bacterial filtration technologies, to produce purified water that meets requirements for laboratory grade water.
Range of make-up rates 60/120/190 l/hr to suit a wide range of applications
Integral 50 litre purified water storage tank eliminates the need for external tanks
Carbon dioxide membrane degasser to enhance deioniser capacity
Range of polishing deionisers for higher volume users
Full colour intuitive LCD touch screen for ease of operation
Variable speed distribution pump to conserve energy during periods of low demand
Cat5 compliant break tank to comply with water regulations
Internal by-pass to provide continuity of service in an emergency
Range of make-up rates 60/120/190 l/hr to suit a wide range of applications
Integral 50 litre purified water storage tank eliminates the need for external tanks
Carbon dioxide membrane degasser to enhance deioniser capacity
Range of polishing deionisers for higher volume users
Full colour intuitive LCD touch screen for ease of operation
Variable speed distribution pump to conserve energy during periods of low demand
Cat5 compliant break tank to comply with water regulations
Internal by-pass to provide continuity of service in an emergency
Water purification unit compact / laboratory - max. 48 L/h | Purewater 300
The Select Purewater 300 is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1MΩ.cm at a flow rate of up to 48 litres per hour.
The system is compact, robust,...
The system is compact, robust,...
Water purification unit compact / laboratory - max. 48 L/h | Purewater 300
The Select Purewater 300 is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1MΩ.cm at a flow rate of up to 48 litres per hour.
The system is compact, robust, simple to use and easy to maintain, using proven pre-treatment, reverse osmosis and ion-exchange deionisation technology to ensure a reliable and consistent supply of purified water.
The unit has standard connections for quick installation, with a high flow outlet that fits easily to most glassware washing machines using a conventional gravity feed. It incorporates a standard 20 litre integral tank or can be supplied with an optional external 50 or 100 litre tank for extra capacity.
The Purewater 300 can also be supplied with an optional boost pump to ensure optimum performance at all times, especially in areas where incoming feed water pressure is below 4 bar.
The system is compact, robust, simple to use and easy to maintain, using proven pre-treatment, reverse osmosis and ion-exchange deionisation technology to ensure a reliable and consistent supply of purified water.
The unit has standard connections for quick installation, with a high flow outlet that fits easily to most glassware washing machines using a conventional gravity feed. It incorporates a standard 20 litre integral tank or can be supplied with an optional external 50 or 100 litre tank for extra capacity.
The Purewater 300 can also be supplied with an optional boost pump to ensure optimum performance at all times, especially in areas where incoming feed water pressure is below 4 bar.
Water purification unit laboratory - 100 ml/min | CombiFlash® Rf 150
The CombiFlash Rf 150 delivers reversed phase purifications at a fraction of the cost of preparative HPLC. The system operates at pressures up to 150 psi (10.3 bar) for your separation needs. The rugged construction you have come to expect from Teledyne Isco makes this a daily workhorse for your demanding...
Water purification unit laboratory - 100 ml/min | CombiFlash® Rf 150
The CombiFlash Rf 150 delivers reversed phase purifications at a fraction of the cost of preparative HPLC. The system operates at pressures up to 150 psi (10.3 bar) for your separation needs. The rugged construction you have come to expect from Teledyne Isco makes this a daily workhorse for your demanding routine.
The CombiFlash Rf 150 is designed to exceed expectations in both performance and reliability. Driven through our highly acclaimed PeakTrak user interface, even the beginning user will be up and running in a matter of minutes. Don't waste your valuable time learning complex software when you can begin purifying samples within minutes. As with all other CombiFlash models, Teledyne Isco's intuitive PeakTrak software lets you access all the commands you need from a single touchscreen.
Quickly program binary linear gradients, define a custom step gradient, or set isocratic purification conditions using our on board graphical interface, then monitor the purification remotely from your office computer or iPad.
The system accepts a variety of rack sizes so that samples can be collected in volumes appropriate for the column being used.
The CombiFlash Rf 150 is designed to exceed expectations in both performance and reliability. Driven through our highly acclaimed PeakTrak user interface, even the beginning user will be up and running in a matter of minutes. Don't waste your valuable time learning complex software when you can begin purifying samples within minutes. As with all other CombiFlash models, Teledyne Isco's intuitive PeakTrak software lets you access all the commands you need from a single touchscreen.
Quickly program binary linear gradients, define a custom step gradient, or set isocratic purification conditions using our on board graphical interface, then monitor the purification remotely from your office computer or iPad.
The system accepts a variety of rack sizes so that samples can be collected in volumes appropriate for the column being used.
Water purification unit laboratory - CombiFlash® Rf 200
Teledyne Isco advances automated chromatography again with the CombiFlash Rf 200 system. The CombiFlash® Rf 200 uses RFID (Radio Frequency Identification) technology to automate...
Water purification unit laboratory - CombiFlash® Rf 200
Teledyne Isco advances automated chromatography again with the CombiFlash Rf 200 system. The CombiFlash® Rf 200 uses RFID (Radio Frequency Identification) technology to automate...
Water purification unit laboratory - CombiFlash® Rf 200i
Teledyne Isco advances automated chromatography again with the CombiFlash Rf 200i system. The system enhances detection capabilities with an integrated evaporative light scattering detector (ELSD). In addition to UV or UV-vis detection for absorbing compounds, the...
Water purification unit laboratory - CombiFlash® Rf 200i
Teledyne Isco advances automated chromatography again with the CombiFlash Rf 200i system. The system enhances detection capabilities with an integrated evaporative light scattering detector (ELSD). In addition to UV or UV-vis detection for absorbing compounds, the...
Water purification unit laboratory - CombiFlash® Rf 4x
Multitask like never before with the CombiFlash Rf 4x system, a four-sample automated version of the innovative CombiFlash Rf personal purification system. Its built-in control system acts as an Internet...
Water purification unit laboratory - CombiFlash® Rf 4x
Multitask like never before with the CombiFlash Rf 4x system, a four-sample automated version of the innovative CombiFlash Rf personal purification system. Its built-in control system acts as an Internet...
Water purification unit laboratory - 1 l/min | CombiFlash Torrent®
Get the ease of use and reliability provided by CombiFlash and RediSep for Development Scale purification with the all new CombiFlash Torrent Purification System from Teledyne Isco. One liter per minute flow...
Water purification unit laboratory - 1 l/min | CombiFlash Torrent®
Get the ease of use and reliability provided by CombiFlash and RediSep for Development Scale purification with the all new CombiFlash Torrent Purification System from Teledyne Isco. One liter per minute flow rates rapidly purify up to 300 grams of sample. The 100 psi pumps accurately deliver a reproducible binary gradient. The CombiFlash Torrent system is designed to be flexible for a variety of large-scale purification needs, with various methods of sample introduction and collection.
The trusted RediSep columns communicate with the system to quickly create methods without error through RFID technology. Column information is accessed on the RediSep column for easy recall of methods. Large scale RediSep columns, with quick Luer connections, are available in a broad range of sizes and medias.
The trusted RediSep columns communicate with the system to quickly create methods without error through RFID technology. Column information is accessed on the RediSep column for easy recall of methods. Large scale RediSep columns, with quick Luer connections, are available in a broad range of sizes and medias.
Ultra-pure water purification unit for laboratories
ELGA Berkefeld water treatment plants may have the solution where especially high requirements are placed on desalinated water (de-ionated water). For every case whether it is totally desalinated water or water for...
Ultra-pure water purification unit for laboratories
ELGA Berkefeld water treatment plants may have the solution where especially high requirements are placed on desalinated water (de-ionated water). For every case whether it is totally desalinated water or water for membrane degasing plants, laboratories, sterilisation and production processes, boiler feed
water or industrial water, a suitable plant technology is at our disposal.
The basis of an ultrapure water system is in the majority of cases a one or two-level alkaline-driven reverse osmosis plant. These plants can be delivered as midiRO, maxiRO and megaRO within a standard area of performance from 100 up to 15,000 l/h. An optimal actuation of fluid flow can achieve plant yields of up to 85 % and more,with a permeate admittance down to less than 1 μS/cm in the permeate, in a two level actuated plant on the side of the permeate.
water or industrial water, a suitable plant technology is at our disposal.
The basis of an ultrapure water system is in the majority of cases a one or two-level alkaline-driven reverse osmosis plant. These plants can be delivered as midiRO, maxiRO and megaRO within a standard area of performance from 100 up to 15,000 l/h. An optimal actuation of fluid flow can achieve plant yields of up to 85 % and more,with a permeate admittance down to less than 1 μS/cm in the permeate, in a two level actuated plant on the side of the permeate.