+7 (812) 645-08-06
Conductive level switches
select brand
Conductive level switch / with multiple electrodes
This series of conductive level sensors is utilized for the detection of conductive limit value. They have a rod diameter of 4mm with 1, 2, 3 or 4 rod electrodes. The length varies between 500 mm (1 rod electrode)...
Conductive level switch / with multiple electrodes
This series of conductive level sensors is utilized for the detection of conductive limit value. They have a rod diameter of 4mm with 1, 2, 3 or 4 rod electrodes. The length varies between 500 mm (1 rod electrode)...
Conductive level switch - max. 30 bar, max. 150 °C | NES
The NES model is a conductive-type level monitor for gauging the level or controlling the pumping of conductive fluids. The principle of operation is thus: on application of a low AC voltage across the container wall...
Conductive level switch - max. 30 bar, max. 150 °C | NES
The NES model is a conductive-type level monitor for gauging the level or controlling the pumping of conductive fluids. The principle of operation is thus: on application of a low AC voltage across the container wall and switching point, both of which are conductive, current starts flowing when a conductive fluid fills the gap. This current can be made to operate a relay which is in turn connected to a monitor or pump controller, based on the requirement. Thus, for minimum- and maximum-level control, two switching points and two relays are required, and for multiple-level signaling multiple switching points and relays are required. The lack of any moving parts makes it a preferred choice for use with conductive fluids with high viscosity, very low density, or solid precipitates. Either NE-104 or NE-304 (equivalent to 2 NE-104) relays can be used.
Conductive level switch / with multiple electrodes - -20 °C ... +120 °C | ELT
Housing: Aluminum alloy, SS304, SS316 available
Probe Insulation Material: PTFE (for ELT101 only); PP (for ELT102~108)
Rode Probe: SS316 standard and option availbel
Working...
Probe Insulation Material: PTFE (for ELT101 only); PP (for ELT102~108)
Rode Probe: SS316 standard and option availbel
Working...
Conductive level switch / with multiple electrodes - -20 °C ... +120 °C | ELT
Housing: Aluminum alloy, SS304, SS316 available
Probe Insulation Material: PTFE (for ELT101 only); PP (for ELT102~108)
Rode Probe: SS316 standard and option availbel
Working...
Probe Insulation Material: PTFE (for ELT101 only); PP (for ELT102~108)
Rode Probe: SS316 standard and option availbel
Working...