+7 (812) 645-08-06
Controller boards
select brand
PCI controller card - F10 PCI 03
The safety-related F10 PCI 03 controller is a printed circuit board system for mounting in a PC. The controller is designed as...
PCI controller card - F10 PCI 03
The safety-related F10 PCI 03 controller is a printed circuit board system for mounting in a PC. The controller is designed as a PC Card for the PCI slot.
The configuration is performed using SILworX, see Chapter 4.3. Communication to the
PADT occurs via the PCI interface of the PC.
The device is suitable for sequence of events recording (SOE), see Chapter 4.2. The
device supports multitasking and reload. For more details, refer to the System Manual for Compact Systems (HI 800 141 E).
The configuration is performed using SILworX, see Chapter 4.3. Communication to the
PADT occurs via the PCI interface of the PC.
The device is suitable for sequence of events recording (SOE), see Chapter 4.2. The
device supports multitasking and reload. For more details, refer to the System Manual for Compact Systems (HI 800 141 E).
Controller card for electric actuator - 12 - 24 V | 7CMT1A
The electronic card 7CMT1A can drive on both directions a Dc electric actuator with or
without mechanical end-switch.
The...
without mechanical end-switch.
The...
Controller card for electric actuator - 12 - 24 V | 7CMT1A
The electronic card 7CMT1A can drive on both directions a Dc electric actuator with or
without mechanical end-switch.
The card is equipped with a microprocessor for digital control of the speed and current
regulation , an efficient diagnostics of the failures and anomalies ; programmability of the
main parameters .
The MOSFET power stage is an H bridge configuration operating with PWM 16KHz.
The chopper is designed in accordance with the most important EC standards.
without mechanical end-switch.
The card is equipped with a microprocessor for digital control of the speed and current
regulation , an efficient diagnostics of the failures and anomalies ; programmability of the
main parameters .
The MOSFET power stage is an H bridge configuration operating with PWM 16KHz.
The chopper is designed in accordance with the most important EC standards.
Controller card for electric actuator - 24 V, 4 A | 7CAT2415
The electronic card 7CAT2415 can drive on both directions a Dc electric actuator with or
without mechanical end-switch.
The...
without mechanical end-switch.
The...
Controller card for electric actuator - 24 V, 4 A | 7CAT2415
The electronic card 7CAT2415 can drive on both directions a Dc electric actuator with or
without mechanical end-switch.
The card is equipped with a microprocessor for digital control of the speed and current
regulation , an efficient diagnostics of the failures and anomalies ; programmability of the
main parameters .
The MOSFET power stage is an “H bridge” configuration operating with PWM 16KHz.
The chopper is designed in accordance with the most important EC standards.
without mechanical end-switch.
The card is equipped with a microprocessor for digital control of the speed and current
regulation , an efficient diagnostics of the failures and anomalies ; programmability of the
main parameters .
The MOSFET power stage is an “H bridge” configuration operating with PWM 16KHz.
The chopper is designed in accordance with the most important EC standards.
Converter module controller card - JX6-CON+
Controller module with 16 digital inputs, 3 submodule sockets and 1 JX6-O16 socket, 7.5 W DC/DC converter for one JX6-DA4 module (a maximum of 4 current/voltage outputs).
Converter module controller card - JX6-CON-MOVE
Controller module with 16 digital inputs and sockets for JX6-O16...
Converter module controller card - JX6-CON-MOVE
Controller module with 16 digital inputs and sockets for JX6-O16 and JX6-SB for a maximum of 3 JetMove servo controllers or 2 submodule sockets, 7.5 W DC/DC converter for a maximum of 4 current/voltage outputs when a JX6-DA4 module is used.