+7 (812) 645-08-06
Lifting columns and Other electric actuators
select brand
Rotary servo-cylinder - 2 - 23 Nm | PW
SCHUNK servo-electric rotary pan-tilt actuators of the PW 70-90 series represent a high-quality,...
Rotary servo-cylinder - 2 - 23 Nm | PW
SCHUNK servo-electric rotary pan-tilt actuators of the PW 70-90 series represent a high-quality, robust device, used for pivoting and turning of workpieces in various applications. They are featured with two swiveling axes that enable these actuators to perform high-quality positioning with great precision. They also feature a RS232 port, and Profibus-DP and CAN-Bus interfaces.
Electric actuator / linear - max. 1 500 N | CAR Series
The CAR actuator has a great performance standard that works with many parts like the SKF ball screw....
Electric actuator / linear - max. 1 500 N | CAR Series
The CAR actuator has a great performance standard that works with many parts like the SKF ball screw. It comes with a strong gearbox assembly and uses many DC and AC motors.
It is a fully operational unit that can match up with many applications and uses a modular design setup. It comes in left- and right-hand versions and uses a sturdy actuator that works for many components.
It is a fully operational unit that can match up with many applications and uses a modular design setup. It comes in left- and right-hand versions and uses a sturdy actuator that works for many components.
Electric actuator / linear - max. 12 000 N | CASD Series
The CASD linear actuators are designed to last for over 20 years, It has Increased power generation with limited backlash, It is Virtually maintenance fee and because...
Electric actuator / linear - max. 12 000 N | CASD Series
The CASD linear actuators are designed to last for over 20 years, It has Increased power generation with limited backlash, It is Virtually maintenance fee and because of that the maintenance cost is reduced, It can be installed easy and fast with sealed protection tube tthe blocks contaminants to avoid contamination, The design and built of CASD can last and take different outdoor conditions because it is IP65 certified making it Dust Proof and Splash Resistant, It only consume Low Current and it has a Lower solar system lifetime cost. The CASD-60 has a dynamic load of 12000 N and a Static load of 60000 N with speed up to 2.5 mm/s.
DC telescopic column - 1 650 N | CAWA
CAWA is a compact linear actuator made for vertically hanging loads. It has a wide...
DC telescopic column - 1 650 N | CAWA
CAWA is a compact linear actuator made for vertically hanging loads. It has a wide selection of front attachments and features high lubrication for longevity of service life. It's also compactly designed to promote mobility. It is usually used in the medical field as well as in factory automation industry.
Telescopic column - FRE
The SKF actuation systems feature telescopic pillars in stable and sophisticated designs. The...
Telescopic column - FRE
The SKF actuation systems feature telescopic pillars in stable and sophisticated designs. The FRE guiding tube system is universally applicable to any operation on table and chair base constructions, and the medical business. The FRE is also customizable and user-friendly, allowing users to integrate their own personal drive-system (electric or hydraulic) into the product.
Adjustable telescopic column - 2 500 N | TFG
Benefits
* Push or pull load
* Compact design
* Fast movement
* Powerful
* Plug and play
* Push or pull load
* Compact design
* Fast movement
* Powerful
* Plug and play
Electric actuator / linear / ball screw / compact - ø 8 - 25 mm, 50 - 150 mm | LESH series
The LESH electric actuator is a mixed motor and ball screw drive, worktable, and linear guide. The body size...
Electric actuator / linear / ball screw / compact - ø 8 - 25 mm, 50 - 150 mm | LESH series
The LESH electric actuator is a mixed motor and ball screw drive, worktable, and linear guide. The body size of the actuator are 8, 16 and 25 that is very compact with strokes of 50, 75, 100, and 150 depending on the availability of the size. The completed table is more definite than the LES formed table as it is enabled to take up higher horizontal road. It has a more complex deflection from the offset loading.
Electric actuator / linear / compact / guided - max. 400 mm/s, 10 - 30 mm | LAT3 series
This electric actuator offers quite a few solutions that are intended for large or even heavy loads. But what if you'd require...
Electric actuator / linear / compact / guided - max. 400 mm/s, 10 - 30 mm | LAT3 series
This electric actuator offers quite a few solutions that are intended for large or even heavy loads. But what if you'd require something that is intended for very light-weight loads? Or maybe you have space restrictions?
SMC's LAT3 is integrated with a permanent magnetic linear engine with a recirculating basketball guide along with a high resolution situation sensor in a package that has dimensions of a card. The trim 9mm report can fit easily into a tight installation cover.
SMC's LAT3 is integrated with a permanent magnetic linear engine with a recirculating basketball guide along with a high resolution situation sensor in a package that has dimensions of a card. The trim 9mm report can fit easily into a tight installation cover.
Electric actuator / linear / ball screw / AC - max. 3 000 mm/s, max. 3 000 mm | LEJ series
The Series LEJ Electric Slider is a high rigidity slider with electronic motion control which is designed to carry out load conveying capacity, greater moment loading...
Electric actuator / linear / ball screw / AC - max. 3 000 mm/s, max. 3 000 mm | LEJ series
The Series LEJ Electric Slider is a high rigidity slider with electronic motion control which is designed to carry out load conveying capacity, greater moment loading and superior acceleration and deceleration. In attaining higher load capacity, a double axis linear guide is included in the chassis.
These series have a two drive type one is ball screw and another is a belt. The belt drive enhances speed by giving longer and higher strokes while the balls screw enhance high positioning repeatability. Plus the motor has its incremental driver which register seven positions or respond immediately to a pulse train from the PLC.
These series have a two drive type one is ball screw and another is a belt. The belt drive enhances speed by giving longer and higher strokes while the balls screw enhance high positioning repeatability. Plus the motor has its incremental driver which register seven positions or respond immediately to a pulse train from the PLC.