+7 (812) 645-08-06
Lifting columns and Other electric actuators
select brand
Compact lifting column - max. 2 500 N, max. 20 mm/s, 300 - 500 mm | DL2
The Deskline DL2 column is made for workstation solutions and can adjust the height of any computer workstation, kitchen or workbench. The DL@...
Compact lifting column - max. 2 500 N, max. 20 mm/s, 300 - 500 mm | DL2
The Deskline DL2 column is made for workstation solutions and can adjust the height of any computer workstation, kitchen or workbench. The DL@ column can lift loads and is sturdy enough to fit in with any Deskline control box or control.
The CBD4, 5 and 6 systems may use a hall sensor and mini-fit motor cable. The CBD4 may use four DL2s in a parallel pattern and the CDB5/6 works with two DL2s in a parallel setup. In addition, the CBD5 control box may be used with the DL2 column. The unit can run at speeds of 43mm/s and has a thrust of up to 2,500N.
The CBD4, 5 and 6 systems may use a hall sensor and mini-fit motor cable. The CBD4 may use four DL2s in a parallel pattern and the CDB5/6 works with two DL2s in a parallel setup. In addition, the CBD5 control box may be used with the DL2 column. The unit can run at speeds of 43mm/s and has a thrust of up to 2,500N.
Furniture lifting column / compact - max. 800 N, max. 38 mm/s, max. 965 mm | DL11 series
The Linak DL11 is primarily a 3-piece lifting column. It is noted for being designed after the DL6 and DL5 motor housing models. This gives the DL11 slightly familiar features, such as...
Furniture lifting column / compact - max. 800 N, max. 38 mm/s, max. 965 mm | DL11 series
The Linak DL11 is primarily a 3-piece lifting column. It is noted for being designed after the DL6 and DL5 motor housing models. This gives the DL11 slightly familiar features, such as...
Furniture lifting column - max. 700 N, max. 38 mm/s, max. 660 mm | DL12 series
The DL12 system is based on the concept of 3 part lifting columns complete with rectangular characteristics. The inline...
Furniture lifting column - max. 700 N, max. 38 mm/s, max. 660 mm | DL12 series
The DL12 system is based on the concept of 3 part lifting columns complete with rectangular characteristics. The inline design simply means that the motor is concealed within the profiles. This gives the column an extremely sleek and classy look, which is easy to embed in wide range of desk designs. The 3 stage design guarantees an extremely low onsite dimension. The The DL12 system is visually appealing with reduced spaces between the profiles and invisible gliding pads.
Drive for roller shutters and awnings - Mondrian 4
The Came Mondrian 4 is a high performance mechanical motor specifically engineered for shutters...
Drive for roller shutters and awnings - Mondrian 4
The Came Mondrian 4 is a high performance mechanical motor specifically engineered for shutters...
Drive for roller shutters and awnings - Mondrian R4
This mechanical motor moves shutters and blinds. It is strong and durable operating...
Drive for roller shutters and awnings - Mondrian R4
This mechanical motor moves shutters and blinds. It is strong and durable operating...
Drive for roller shutters and awnings - Mondrian 5
This motor is a tubular model that can handle approximately 230V of energy....
Drive for roller shutters and awnings - Mondrian 5
This motor is a tubular model that can handle approximately 230V of energy. A mechanical limit-switch is also included with this product.
This motor is adjustable using a manual screw. It features a maximum power of approximately 50Nm and can hoist up to 92kg at the most.
This motor is adjustable using a manual screw. It features a maximum power of approximately 50Nm and can hoist up to 92kg at the most.
Drive for roller shutters and awnings - Mondrian R5
Measuring 45mm in diameter, these mechanical motors were created for screens,...
Drive for roller shutters and awnings - Mondrian R5
Measuring 45mm in diameter, these mechanical motors were created for screens, shutters and awnings. They operate on 230VAC, 50Hz power. Up to 92kg in hoisted weight can also be managed. There is a mechanical limit switch present on the device as well as a built-in radio receiver using the 433.92 MHz frequency.
Drive for roller shutters and awnings - MATTA 5
230 V AC - 50 Hz tubular motor. Mechanical limit switch with screw-based...
Drive for roller shutters and awnings - MATTA 5
230 V AC - 50 Hz tubular motor. Mechanical limit switch with screw-based progressive adjustment.
Can be used on a 50 mm round or octagonal tube.
Particularly suitable for application on small blinds or shutters.
Holes on the head at 29 mm and 46 mm.
Can be used on a 50 mm round or octagonal tube.
Particularly suitable for application on small blinds or shutters.
Holes on the head at 29 mm and 46 mm.
Electric actuator / linear - 96 N | LV25 series
The Gimatic's compact and versatile linear actuators can support various drivers out on the market...
Electric actuator / linear - 96 N | LV25 series
The Gimatic's compact and versatile linear actuators can support various drivers out on the market and are fully compatible with both ZVP and LVP linear guides. The Mounted with encoder sensors and linear motor guided by ball-bearing guide system this device is confident that it will meet the demanding standard of the industry. The tool is very safe and easy to handle.
Electric cylinder / rotary - 45 Ncm, 90° - 180° | MRE series
The MRE Dual-Position Electronic Rotary Actuators from Gimatic feature an integrated motor driver, a fiber-carbon gear reduction function, an easy-to-use...
Electric cylinder / rotary - 45 Ncm, 90° - 180° | MRE series
The MRE Dual-Position Electronic Rotary Actuators from Gimatic feature an integrated motor driver, a fiber-carbon gear reduction function, an easy-to-use gripper (plug & play function), an electricity-less performance whenever it is position correctly, incorporated ball bearings, a maintenance-independent design (up to 5 million cycles without any required maintenance), and many more. They also sport compatibility capabilities with MPPM electric gripper units, a brushless motor (prolonged overall lifespan), a 24 Vdc minimal-voltage power source, and even alternative inductive detectors.