+7 (812) 645-08-06
Other furnaces
select brand
Electric furnace
Annealing atmospheres which contain carbon, oxygen... may contaminate the steel.
For example, the presence of carbon on the cold-rolled strip has a detrimental effect...
For example, the presence of carbon on the cold-rolled strip has a detrimental effect...
Electric furnace
Annealing atmospheres which contain carbon, oxygen... may contaminate the steel.
For example, the presence of carbon on the cold-rolled strip has a detrimental effect...
For example, the presence of carbon on the cold-rolled strip has a detrimental effect...
Glassworks furnace - +950 °C | GF series
The furnaces in the GF75 - GF 1425 product line were conceived for professional glass artists. The heating elements, closely arranged, protected in quartz tubes,...
Glassworks furnace - +950 °C | GF series
The furnaces in the GF75 - GF 1425 product line were conceived for professional glass artists. The heating elements, closely arranged, protected in quartz tubes, ensure a very high degree of temperature uniformity during fusing or during bending across the whole table surface. The optimized insulation, made of non-classified fibrous material in the furnace hood and robust lightweight refractory bricks in the furnace floor allow clean and safe operation. High current connection capacities assure that the furnace can be rapidly warmed up. The complete firing sequence is controlled by the intuitively operated Controller P300.
Glassworks furnace - +950 °C | GFM series
The GFM product line was developed to meet the special requirements of production. For different applications different table depths can be supplied. Standard is a table for fusing. Various tables and tubs with different heights and numerous additional equipments...
Glassworks furnace - +950 °C | GFM series
The GFM product line was developed to meet the special requirements of production. For different applications different table depths can be supplied. Standard is a table for fusing. Various tables and tubs with different heights and numerous additional equipments...
Glassworks furnace - max. +900 °C | GW series
For slumping and bending of complex glass parts, e.g. glass furniture, shower cabins, etc., tub furnaces are the right choice. Full coverage heating: from the lid, all 4 sides and the tub bottom. Due to the modular system additional tubs in customized dimensions...
Glassworks furnace - max. +900 °C | GW series
For slumping and bending of complex glass parts, e.g. glass furniture, shower cabins, etc., tub furnaces are the right choice. Full coverage heating: from the lid, all 4 sides and the tub bottom. Due to the modular system additional tubs in customized dimensions...
Glassworks furnace - max. +900 °C | HG series
Nabertherm markets this range of top-hat furnaces for bending and slumping of large glass parts. The standard furnace is equipped with one table running on rails which can be pulled out for easy charging. As accessory an additional table can be integrated, which is charged while the other table...
Glassworks furnace - max. +900 °C | HG series
Nabertherm markets this range of top-hat furnaces for bending and slumping of large glass parts. The standard furnace is equipped with one table running on rails which can be pulled out for easy charging. As accessory an additional table can be integrated, which is charged while the other table...
Chamber furnace / electric - max. +850 °C | N/NB series
The N and NB chamber furnaces are especially designed for dewaxing and subsequent firing of the ceramic form. The electrically heated models are operated below the ignition point of the wax during dewaxing. The furnaces have a heated stainless steel drain in the bottom of the furnace chamber, formed as a funnel with the discharge near the center of the furnace. The...
Chamber furnace / electric - max. +850 °C | N/NB series
The N and NB chamber furnaces are especially designed for dewaxing and subsequent firing of the ceramic form. The electrically heated models are operated below the ignition point of the wax during dewaxing. The furnaces have a heated stainless steel drain in the bottom of the furnace chamber, formed as a funnel with the discharge near the center of the furnace. The...
Heating system uniform magnetic - UMH S
At the UMH (Uniform Magnetic Heating) process the work piece to be heated is placed into an alternating magnetic field. The changing of the polarization generates friction losses in the part and therefore heat.
This innovative process is...
This innovative process is...
Heating system uniform magnetic - UMH S
At the UMH (Uniform Magnetic Heating) process the work piece to be heated is placed into an alternating magnetic field. The changing of the polarization generates friction losses in the part and therefore heat.
This innovative process is...
This innovative process is...