+7 (812) 645-08-06
Hardware tools for electronics development
select brand
Evaluation kit - EL98xx series
The EL9820 EtherCAT evaluation kit acts as a platform for the improvement of EtherCAT slaves like the ET9300 Slave Stack Code that comes with it. The EtherCAT connection with the ASIC...
Evaluation kit - EL98xx series
The EL9820 EtherCAT evaluation kit acts as a platform for the improvement of EtherCAT slaves like the ET9300 Slave Stack Code that comes with it. The EtherCAT connection with the ASIC ET1100 is made possible by the piggyback controller board that comes with the kit. All digital I/O, SPI and asynchronous μController process data interfaces are integrated to the pin strips while being selected via PDI selector switch. Users can choose to connect the SPI interface directly to the pin strip or with a PIC microcontroller that is also included in the kit. It also comes with a software development and debugging interface. TR8100 workshop is available as an option. The also comes with accessories such as cables and documentation.
Developer's Kit rapid / VME - VME RDK
This set of VME Boards and VHDL IP is part of the VME Bus family. The VME Bus family is aimed at making low-cost access possible to resources required to build a fast prototype of a VME master/slave/controller subsystem....
Developer's Kit rapid / VME - VME RDK
This set of VME Boards and VHDL IP is part of the VME Bus family. The VME Bus family is aimed at making low-cost access possible to resources required to build a fast prototype of a VME master/slave/controller subsystem. Numerous types of application can be made with with minimal effort due to the modularity of the resources, relating to both the hardware board and the firmware VHDL IP.
It can be used in various applications such as in boards or components when replacing obsolete ones, in test systems in order to perform a test cycle to the UUT slave board and/or to acknowledge the bus cycles from a UUT master board as well as performing bus signal checks. It is also of use in heterogeneous systems when a mixture of varying form factor boards and a flexible bridge are needed, for example, between VME standard/customized bus and PC/PXI bus.
It can be used in various applications such as in boards or components when replacing obsolete ones, in test systems in order to perform a test cycle to the UUT slave board and/or to acknowledge the bus cycles from a UUT master board as well as performing bus signal checks. It is also of use in heterogeneous systems when a mixture of varying form factor boards and a flexible bridge are needed, for example, between VME standard/customized bus and PC/PXI bus.
Evaluation kit - 300 MHz -> 450 MHz
EVB71101 Evaluation Board for TH71101
The TH71101 FSK/ASK single-conversion superheterodyne receiver IC is designed for applications in the European 433 MHz industrial-scientific-medical (ISM) band,...
The TH71101 FSK/ASK single-conversion superheterodyne receiver IC is designed for applications in the European 433 MHz industrial-scientific-medical (ISM) band,...
Evaluation kit - 300 MHz -> 450 MHz
EVB71101 Evaluation Board for TH71101
The TH71101 FSK/ASK single-conversion superheterodyne receiver IC is designed for applications in the European 433 MHz industrial-scientific-medical (ISM) band, according to the EN 300 220 telecommunications standard. It can also be used for any other system with carrier frequencies ranging from 300 MHz to 450 MHz (e.g. for applications according to FCC part 15 and ARIB STD-T67).
Features and Benefits
-Single-conversion superhet architecture for low external component count
-FSK demodulation with phase-coincidence demodulator
-Low current consumption in active mode and very low standby current
-Switchable LNA gain for improved dynamic range
-RSSI allows signal strength indication and ASK detection
-Surface mount package LQFP32
The TH71101 FSK/ASK single-conversion superheterodyne receiver IC is designed for applications in the European 433 MHz industrial-scientific-medical (ISM) band, according to the EN 300 220 telecommunications standard. It can also be used for any other system with carrier frequencies ranging from 300 MHz to 450 MHz (e.g. for applications according to FCC part 15 and ARIB STD-T67).
Features and Benefits
-Single-conversion superhet architecture for low external component count
-FSK demodulation with phase-coincidence demodulator
-Low current consumption in active mode and very low standby current
-Switchable LNA gain for improved dynamic range
-RSSI allows signal strength indication and ASK detection
-Surface mount package LQFP32