+7 (812) 645-08-06
Temperature transmitters
select brand
Programmable temperature transmitter - 533x series
The temperature transmitters available from Conax technologies are meant to meet the...
Programmable temperature transmitter - 533x series
The temperature transmitters available from Conax technologies are meant to meet the exact requirements of the customers. The brand comes with 5 years of guarantee on almost every products in the line. It provides very accurate measurement. It is helpful in linearized measurement of temperature and also provides amplification.
Programmable temperature transmitter / DIN rail mount - 6331A
Transmitter from Conax is a device that is meant for linearized measurement of temperature. It is capable of converting any changes in linear resistance to...
Programmable temperature transmitter / DIN rail mount - 6331A
Transmitter from Conax is a device that is meant for linearized measurement of temperature. It is capable of converting any changes in linear resistance to standard-analog current-signal. It can amplify the bipolar mV-signal into standard current signal. It can be programmed within seconds for measuring temperature that comes under standard values. The resistance inputs and RTD comprise of cable compensation that of 2, 3 or 4 wired connection. Limit can get programmed output signal. There is a provision for continuously checking the data that is stored vitally. It can be mounted either vertically or horizontally.
Pt100 temperature transmitter - 20 - 500 °C | HPT
The 2-wire temperature transmitter for RTD's is a revolutionary product manufactured...
Pt100 temperature transmitter - 20 - 500 °C | HPT
The 2-wire temperature transmitter for RTD's is a revolutionary product manufactured by Conax technologies. The plug in resistors assist in the temperature changes which can easily be modified due to the easily removable HPT housing. It is designed to fit the T11 terminal head model and is definitely cost effective.
Programmable temperature transmitter - PTH-400
Conax Model PTH-400 is a small-sized 2-wire transmitter that can be programmed by computers.The...
Programmable temperature transmitter - PTH-400
Conax Model PTH-400 is a small-sized 2-wire transmitter that can be programmed by computers.The...
Programmable temperature transmitter / DIN rail mount - PDT-400
This DIN rail mount from Conax is a two-wire transmitter unit. The PDT-400 has a microprocessor...
Programmable temperature transmitter / DIN rail mount - PDT-400
This DIN rail mount from Conax is a two-wire transmitter unit. The PDT-400 has a microprocessor design that can work without a power supply and is especially accurate.
Software makes it programmable while a 4-20mA current loop output is added. These RFI/EMI protected units and dual sensor support system make the unit more accurate and supportive.
Software makes it programmable while a 4-20mA current loop output is added. These RFI/EMI protected units and dual sensor support system make the unit more accurate and supportive.
Temperature transmitter
The Series 650 Temperature Transmitter by Dwyer® has a 4-20 mA signal. It also has a temperature that ranges from -55 to 180°C. This is a two-wire...
Temperature transmitter
The Series 650 Temperature Transmitter by Dwyer® has a 4-20 mA signal. It also has a temperature that ranges from -55 to 180°C. This is a two-wire...
Wireless temperature transmitter - WTP series
Dwyer's Series WTP wireless temperature sensors allow flexibility in terms of installation whether on chilled water lines, air ducts...
Wireless temperature transmitter - WTP series
Dwyer's Series WTP wireless temperature sensors allow flexibility in terms of installation whether on chilled water lines, air ducts or outside a building without any wires to limit the location of the sensor. Example the 3.6 V lithium battery is able to power the unit up to 8 hours in every 10 seconds. Since it is equipped with a dependable 418 MHz signal, it can carry measurements to up to 100 feet, though it doesn't need a repeater. But it can opt for a 900 MHz repeater that can measure up to 1000 feet away.
Air duct temperature transmitter - -40 - 302 °F (-40 - 150 °C) | TE-A series
The Dwyer Series TE-A Averaging Temperature Sensors are specially designed to gauge temperature levels in massive air handler units and ducts. The design...
Air duct temperature transmitter - -40 - 302 °F (-40 - 150 °C) | TE-A series
The Dwyer Series TE-A Averaging Temperature Sensors are specially designed to gauge temperature levels in massive air handler units and ducts. The design features flexible aluminum capillaries implemented with four RTD or thermistor sensors, averaged internally to produce a single output. These capillaries come in various lengths (6, 12, & 24 ft available). The Series CC1 mounting brackets are ideal to prevent compromising the sensor wires inside the probe in wall mounting applications. The enclosure also features several knockouts, screw off-capture lid and ample mounting ears for rapid installation.
Programmable temperature transmitter - 652-0
This device can be easily used with any common temperature sensor. It is also easily usable with a slidewire transducer or millivolt signal and produces a 4 to 20mA output signal....
Programmable temperature transmitter - 652-0
This device can be easily used with any common temperature sensor. It is also easily usable with a slidewire transducer or millivolt signal and produces a 4 to 20mA output signal. It gives the customers an easy option to program the Input type and range with the help of PC and simple Windows™ based software program Model 652-C. The customers are also free to change the measurement units, high/low range, filtering-factor, offset, and transmitter reference details.
It also boasts of 500V input to output isolation which ensures that the ground look effects are negated. It is also equipped with four filter settings to remove signal noise.
other features include compactness and versatility.
It also boasts of 500V input to output isolation which ensures that the ground look effects are negated. It is also equipped with four filter settings to remove signal noise.
other features include compactness and versatility.
Analog temperature transmitter - 4 - 20 mA | T19.10
These analog temperature transmitters are ideal for power engineering, plant construction, ventilation, heating,...
Analog temperature transmitter - 4 - 20 mA | T19.10
These analog temperature transmitters are ideal for power engineering, plant construction, ventilation, heating, refrigeration and air conditioning applications. They boast specialized design for Pt100 with a customizable measuring range through soldered jumpers. They are fitted with a fault indicator that displays sensor short circuit and burnout. They are cost efficient, compact and suitable for a wide ambient temperature range.
Analog temperature transmitter - T91.10, T91.20
These analog temperature transmitters are ideally suited for power engineering, plant construction, ventilation,...
Analog temperature transmitter - T91.10, T91.20
These analog temperature transmitters are ideally suited for power engineering, plant construction, ventilation, heating, refrigeration, air-conditioning and other related applications. They are designed for thermocouples or pt1000/pt100 with a 10 v output coupled with a (T91.10) 3-wire and 2-wire mechanism (T91.20). These devices deliver superior precision, conciseness, low price ratio and feature a failure indicator for sensor depletion.
Analog temperature transmitter - T24.10
This temperature transmitter is used in applications relating to machinery, plant construction and...
Analog temperature transmitter - T24.10
This temperature transmitter is used in applications relating to machinery, plant construction and process industry. Ideal for multiplex-systems, it features analog signal processing. It can be configurated via a PC, and sensor simulation for configuration is not necessary. The sensor burnout signalling meets NAMUR NE 43 standards. The WIKA_TT configuration software is in 6 user languages.
Temperature transmitter - T12.10, T12.30
This is a Digital temperature transmitter that can be suitably used in applications pertaining to mechanical...
Temperature transmitter - T12.10, T12.30
This is a Digital temperature transmitter that can be suitably used in applications pertaining to mechanical and industrial sector and process industry. It has been engineered with universal configuration through Windows-PC. There is no need of sensors for simulation and it is configurable sensor short-circuit and sensory burnout. It also allows for condensation and 100 % relative humidity.
Temperature transmitter - T32.1S, T32.3S
The digital temperature transmitter with HART protocol is ideal for use in applications relating to machine building, plant construction and the process industry. It can be configured...
Temperature transmitter - T32.1S, T32.3S
The digital temperature transmitter with HART protocol is ideal for use in applications relating to machine building, plant construction and the process industry. It can be configured with almost all soft- and hardware tools. Free of charge user friendly WIKA Configuration Software WIKA_T32 is available. A TUV certified SIL Version is available for protective equipment and has been developed to meet IEC 61 508 standards.
The signalling meets NAMUR NE43 standards, the EMC meets NE21 standards, and the sensor break detection meets NE89 standards. There is an isolation voltage of AC 1200 V between the sensor and current loop. A universal connection of 1 or 2 sensors is included.
The signalling meets NAMUR NE43 standards, the EMC meets NE21 standards, and the sensor break detection meets NE89 standards. There is an isolation voltage of AC 1200 V between the sensor and current loop. A universal connection of 1 or 2 sensors is included.