+7 (812) 645-08-06
Torque sensors
select brand
Rotary torque transducer / with flange connection / non-contact - 50 - 1000 Nm
The T27 Hollow Flange Rotary torque transducer is used to provide non-contact torque...
Rotary torque transducer / with flange connection / non-contact - 50 - 1000 Nm
The T27 Hollow Flange Rotary torque transducer is used to provide non-contact torque measurement in applications requiring a thru-hole design. Allows thermocouple wires, pneumatic or hydraulic lines to be routed through the sensor. Useful for cold engine test stands where hydraulic couplings are used to clamp to the splined engine shaft.
Reaction torque transducer / shaft / compact / miniature - 1 - 100 Nm | TS21
The TS21 miniature shaft style reaction torque transducer...
Reaction torque transducer / shaft / compact / miniature - 1 - 100 Nm | TS21
The TS21 miniature shaft style reaction torque transducer features keyed shafts and a compact package with short overall length. The keyed shafts allow positive engagment with fixtures or couplings.
Reaction torque transducer - max. 20 Nm | TS22
Capacities from 0.005 Nm to 20 Nm
5X safe overload on capacities up...
Reaction torque transducer - max. 20 Nm | TS22
Capacities from 0.005 Nm to 20 Nm
5X safe overload on capacities up to 2 Nm
Very small measuring ranges
The TS22 overload protected low capacity reaction torque transducer offers very low capacities and features 5x overload protection on capacities upto 2Nm. Commonly used for medical device testing.
5X safe overload on capacities up to 2 Nm
Very small measuring ranges
The TS22 overload protected low capacity reaction torque transducer offers very low capacities and features 5x overload protection on capacities upto 2Nm. Commonly used for medical device testing.
Bearing load cell / with torque function - 5 - 50 Nm, 0.5 - 2 kN | AT101
Capacities from 0.5 kN to 20 kN Force and
from 5 Nm to 50...
from 5 Nm to 50...
Bearing load cell / with torque function - 5 - 50 Nm, 0.5 - 2 kN | AT101
Capacities from 0.5 kN to 20 kN Force and
from 5 Nm to 50 Nm Torque
Measures Force and Torque in one package
The AT101 is an axial torsion transducer for measuring both torque and force in a single sensor. Typical applications include bearing test and material test machines.
from 5 Nm to 50 Nm Torque
Measures Force and Torque in one package
The AT101 is an axial torsion transducer for measuring both torque and force in a single sensor. Typical applications include bearing test and material test machines.
Compact load cell / with torque function - 10 Nm, 10 kN | AT102
Capacity 10 kN Force and 10 Nm Torque
Compact design
...
Compact design
...
Compact load cell / with torque function - 10 Nm, 10 kN | AT102
Capacity 10 kN Force and 10 Nm Torque
Compact design
Side cable exit
The AT102 is an axial torsion transducer for measuring both torque and force in a single sensor. Typical applications include rheometry test machines for rubber testing.
Compact design
Side cable exit
The AT102 is an axial torsion transducer for measuring both torque and force in a single sensor. Typical applications include rheometry test machines for rubber testing.
Load cell with torque function / heavy-duty / waterproof / 6-axis - HEX-80-RA-1200
The OptoForce 6-axis F/T sensor
* has wide measurement range
* is highly overloadable
* can rigidly connect...
* has wide measurement range
* is highly overloadable
* can rigidly connect...
Load cell with torque function / heavy-duty / waterproof / 6-axis - HEX-80-RA-1200
The OptoForce 6-axis F/T sensor
* has wide measurement range
* is highly overloadable
* can rigidly connect to other machine parts on two parallel surfaces
* can determine the gravitational center of the impact on the main surface
* the deformation of the sensor can be mechanically limited
The OMD 6-axis sensor is based on an array of 4 regular OMDs. By knowing in which way each sensor deforms, we can calculate the torque acting on the whole sensor.
* has wide measurement range
* is highly overloadable
* can rigidly connect to other machine parts on two parallel surfaces
* can determine the gravitational center of the impact on the main surface
* the deformation of the sensor can be mechanically limited
The OMD 6-axis sensor is based on an array of 4 regular OMDs. By knowing in which way each sensor deforms, we can calculate the torque acting on the whole sensor.
Robust load cell / waterproof / precision / 6-axis - HEX-80-RA-3200
The OptoForce 6-axis F/T sensor
* has wide measurement range
* is highly overloadable
* can rigidly connect...
* has wide measurement range
* is highly overloadable
* can rigidly connect...
Robust load cell / waterproof / precision / 6-axis - HEX-80-RA-3200
The OptoForce 6-axis F/T sensor
* has wide measurement range
* is highly overloadable
* can rigidly connect to other machine parts on two parallel surfaces
* can determine the gravitational center of the impact on the main surface
* the deformation of the sensor can be mechanically limited
The OMD 6-axis sensor is based on an array of 4 regular OMDs. By knowing in which way each sensor deforms, we can calculate the torque acting on the whole sensor.
* has wide measurement range
* is highly overloadable
* can rigidly connect to other machine parts on two parallel surfaces
* can determine the gravitational center of the impact on the main surface
* the deformation of the sensor can be mechanically limited
The OMD 6-axis sensor is based on an array of 4 regular OMDs. By knowing in which way each sensor deforms, we can calculate the torque acting on the whole sensor.
Static torque sensor / compact - 368-xxx series
The 368-xxx range of strain gauge, compact reaction torque sensors is mainly used to directly...
Static torque sensor / compact - 368-xxx series
The 368-xxx range of strain gauge, compact reaction torque sensors is mainly used to directly measure the static couples of all types of entities. It can be used with low speed for short time. This can also be applicable in testing engines, reducers, drivers, and in output measure for any rotating machine.
Its nominal load can be adjusted by request.
Its nominal load can be adjusted by request.