+7 (812) 645-08-06
Frequency counters
select brand
Digital frequency meter-tachometer - PICA100-F
The PICA100-F by Ditel is a Process indicator which comes with a complete programmable panel meter having a size of 48x24 mm (1/32 DIN). Also, it uses a red LED digits which has a size of 4x8...
Digital frequency meter-tachometer - PICA100-F
The PICA100-F by Ditel is a Process indicator which comes with a complete programmable panel meter having a size of 48x24 mm (1/32 DIN). Also, it uses a red LED digits which has a size of 4x8 mm. It is supported with a sensor supple excitation which is designed for measuring lineal, rpm speed and signal frequency. For this specific model, it uses two relays for enabling the equipment for controlling, regulating and detecting alarms in specific signals. Included in the unit is an RS4P (RS485) communication and analog ANAP selection which enables it to provide an information using MODBUS-RTU protocol which are generated on 0/4-20mA signal. For its display, it can input digit up to 0 to 9999 provided with a programmable decimal point for accurate calculations.
Digital frequency meter-tachometer - PICA-F
This panel instrument is utilized for measuring frequencies and lineal or rpm velocities. It has dimensions of 48 x 24 mm and all settings may be easily changed using the keyboard which comprises three keys...
Digital frequency meter-tachometer - PICA-F
This panel instrument is utilized for measuring frequencies and lineal or rpm velocities. It has dimensions of 48 x 24 mm and all settings may be easily changed using the keyboard which comprises three keys at the very bottom of the display. The display range is from 0 to 9999 with programmable decimal point positioning.
The panel instrument is compatible for connection to most standard sensors including PNP, NPN, PicK-up Magnetic, Namur and switch. It lets you measure frequencies from signals ranging from 10 to 600 V ac, which means a main voltage supply.
It operates at frequency ranges of 99.99 Hz, 999.90 Hz and 9,999 Hz. When in TAC programming mode, the tachometer notes the pulses per revolution. When in Rate programming mode the tachometer shows the frequency/display relationship.
The panel instrument is compatible for connection to most standard sensors including PNP, NPN, PicK-up Magnetic, Namur and switch. It lets you measure frequencies from signals ranging from 10 to 600 V ac, which means a main voltage supply.
It operates at frequency ranges of 99.99 Hz, 999.90 Hz and 9,999 Hz. When in TAC programming mode, the tachometer notes the pulses per revolution. When in Rate programming mode the tachometer shows the frequency/display relationship.
Digital frequency meter-tachometer - DIN 48 x 24 mm | Codix 136
The Codix 136 is an LCD frequency meter from Kubler that has an input frequency range from 1 Hz ... 12 kHz, and a filter function for bounce-free counting...
Digital frequency meter-tachometer - DIN 48 x 24 mm | Codix 136
The Codix 136 is an LCD frequency meter from Kubler that has an input frequency range from 1 Hz ... 12 kHz, and a filter function for bounce-free counting...
Digital frequency meter-tachometer - DIN 96 x 48 mm | Codix 542
The Codix 542 is manufactured by Kuebler, and is an LED frequency meter that has a rapid count input function with...
Digital frequency meter-tachometer - DIN 96 x 48 mm | Codix 542
The Codix 542 is manufactured by Kuebler, and is an LED frequency meter that has a rapid count input function with an utmost input frequency of up to 60 kHz. The unit has a rigid enclosure that has an ingress protection rating of 65. It features a bright LED display that measures 14 mm in height.
The Codix 542 utilizes a high-rate accuracy system where frequencies up to 38 Hz are computed with the use of a time-interval measurement method.
The Codix 542 utilizes a high-rate accuracy system where frequencies up to 38 Hz are computed with the use of a time-interval measurement method.
Frequency counter - SINEAX F534
The SINEAX F534 is a transducer that converts frequency into a proportional DC signal. Its output...
Frequency counter - SINEAX F534
The SINEAX F534 is a transducer that converts frequency into a proportional DC signal. Its output signal can be reused for registration, identification, monitoring, and regulation. This transducer is equipped with a standard GL (Germanischer Lloyd) system applicable for ship operations. Furthermore, it provides progress and stability on the basic frequency of an electric unit.
Frequency counter - SINEAX F535
The SINEAX F534 by Camille Bauer is a transducer or frequency counter. It is especially made for frequency...
Frequency counter - SINEAX F535
The SINEAX F534 by Camille Bauer is a transducer or frequency counter. It is especially made for frequency difference.
The unit can determine the frequency difference as a synchronization control variable. It has an output signal, making it usable for indication, registration, monitoring and management applications. The unit complies with the IP20 standards, enabling resistance to shock.
The unit can determine the frequency difference as a synchronization control variable. It has an output signal, making it usable for indication, registration, monitoring and management applications. The unit complies with the IP20 standards, enabling resistance to shock.