+7 (812) 645-08-06
Universal controllers and regulators
select brand
Modular controller - 24 - 48 V | ECM
Fast and simple commissioning
The modular controller ECM has been developed specifically for electrically driven gripping and rotary modules with an input voltage of 24 V or 48 V. Equipped with standardized plug connections, it can be quickly and easily connected. Control can be provided via Profibus (up to 12 Mbit/s) or CAN...
The modular controller ECM has been developed specifically for electrically driven gripping and rotary modules with an input voltage of 24 V or 48 V. Equipped with standardized plug connections, it can be quickly and easily connected. Control can be provided via Profibus (up to 12 Mbit/s) or CAN...
Modular controller - 24 - 48 V | ECM
Fast and simple commissioning
The modular controller ECM has been developed specifically for electrically driven gripping and rotary modules with an input voltage of 24 V or 48 V. Equipped with standardized plug connections, it can be quickly and easily connected. Control can be provided via Profibus (up to 12 Mbit/s) or CAN bus (up to 1 Mbit/s). From the 4th quarter of 2014, a Profinet interface will be available as an additional option. For commissioning and parameterization via PC with the SCHUNK Motion Tool, the ECM has a USB device connection. Alternatively it can also be put into operation in seconds without connecting a programming device. To do this, a USB stick can be parameterized and addressing is done manually via an easily configurable rotary encoding switch.
Everything in view and under control
Initial module movements can be realized via a DIP switch. The ECM is also equipped with an LED and 7-segment display for status display and error analysis. It is also available with four digital inputs and outputs. It is suitable for evaluating resolvers, encoders with an index, differential encoders and absolute-value transducers (SSI, EnDat), and in particular, enables the control of SCHUNK EGN and EVG grippers as well as the SCHUNK ERS rotary module.
The modular controller ECM has been developed specifically for electrically driven gripping and rotary modules with an input voltage of 24 V or 48 V. Equipped with standardized plug connections, it can be quickly and easily connected. Control can be provided via Profibus (up to 12 Mbit/s) or CAN bus (up to 1 Mbit/s). From the 4th quarter of 2014, a Profinet interface will be available as an additional option. For commissioning and parameterization via PC with the SCHUNK Motion Tool, the ECM has a USB device connection. Alternatively it can also be put into operation in seconds without connecting a programming device. To do this, a USB stick can be parameterized and addressing is done manually via an easily configurable rotary encoding switch.
Everything in view and under control
Initial module movements can be realized via a DIP switch. The ECM is also equipped with an LED and 7-segment display for status display and error analysis. It is also available with four digital inputs and outputs. It is suitable for evaluating resolvers, encoders with an index, differential encoders and absolute-value transducers (SSI, EnDat), and in particular, enables the control of SCHUNK EGN and EVG grippers as well as the SCHUNK ERS rotary module.
Modular controller - ADAM-4500
This advanced controller module is an extension on previous models, with newer, more advanced technologies. It...
Modular controller - ADAM-4500
This advanced controller module is an extension on previous models, with newer, more advanced technologies. It comes with support for Ethernet and an x86-based CPU architecture, which also supports serial ports.
The FTP and HTTP servers and email alarm functions are other bonuses offered, while the I/O design is modularized and provides high flexibility. So buy now and enjoy high quality and durability in a compact design.
The FTP and HTTP servers and email alarm functions are other bonuses offered, while the I/O design is modularized and provides high flexibility. So buy now and enjoy high quality and durability in a compact design.
Control unit - FCU 10
The FCU-10 from Fronius is a control unit with support for FRU 1000 CR rotator units and FTT...
Control unit - FCU 10
The FCU-10 from Fronius is a control unit with support for FRU 1000 CR rotator units and FTT or FRT turntables. This works for welding functions and uses a control unit for turntables.
It is an EMC-compatible unit that is HF-compliant and small enough to manage many functions. It uses a 5m mains cable with a plug and a 3.5m control line turntable.
It is an EMC-compatible unit that is HF-compliant and small enough to manage many functions. It uses a 5m mains cable with a plug and a 3.5m control line turntable.
Control unit - FRC 60
The FRC-60 is a solid remote control unit designed for FCB column and boom. This device is especially...
Control unit - FRC 60
The FRC-60 is a solid remote control unit designed for FCB column and boom. This device is especially used for mechanized longitudinal and overlay welding applications. Additionally, it is EMC-compatible, HF-compliant with two-step mode and display for travel speed. It is a compact designed device with remote control holder and remote control cable of up to 3 m or 188 inches.