+7 (812) 645-08-06
Dispensing valves, metering valves
select brand
Dispensing valve / 2-way - VHS series
The Lee VHS valves are high speed, 2-way solenoid operated valves designed for applications requiring microliter and nanoliter...
Dispensing valve / 2-way - VHS series
The Lee VHS valves are high speed, 2-way solenoid operated valves designed for applications requiring microliter and nanoliter dispense volumes. These applications include high throughput screening and drug discovery.
The VHS valves feature:
High speed operation: up to 1200 Hz
Long life: 250 million cycles minimum
Fast response: some models as fast as 0.25 ms
Operating pressures up to 120 psi
Wide range of seal materials
The VHS valves feature:
High speed operation: up to 1200 Hz
Long life: 250 million cycles minimum
Fast response: some models as fast as 0.25 ms
Operating pressures up to 120 psi
Wide range of seal materials
Two-component dispensing valve - 207 bar (3000 psi) | MD2™
Introducing the MD2 Dispense Valve by Graco which precisely combines two different...
Two-component dispensing valve - 207 bar (3000 psi) | MD2™
Introducing the MD2 Dispense Valve by Graco which precisely combines two different martialed adhesives . It features parts that are just easy to find and easy to clean. It does not require laborious streamline maintenance for it to be regulated. Plus, it is an affordable dispensing valve because it has reduced operation cost.
Two-component dispensing valve - PD44
The PD44, manufactured by Graco, is a patented meter, mix and dispense valve that has been engineered...
Two-component dispensing valve - PD44
The PD44, manufactured by Graco, is a patented meter, mix and dispense valve that has been engineered to accurately dispense shots of two-component epoxies and most reactive resin systems. It features metering rods that have been matched with machined seals for improved seal life. Furthermore, it eliminates cleaning and potential hardening of materials in the valve.
Metering valve - Dispensit 1095
Graco Dispensit® model 1095 is a rod valve with controlled-flow metering. It has been developed...
Metering valve - Dispensit 1095
Graco Dispensit® model 1095 is a rod valve with controlled-flow metering. It has been developed...
Dispensing piston valve - 400 series
The Series 400 Autovalve is a reliable and durable Pneumatic Autovalve that features Teflon®...
Dispensing piston valve - 400 series
The Series 400 Autovalve is a reliable and durable Pneumatic Autovalve that features Teflon®...
Recirculating valve - 450RC series
The 450C series of valves from NORDSON permit regular material flow while it...
Recirculating valve - 450RC series
The 450C series of valves from NORDSON permit regular material flow while it can still regulate the shut-off mixture. It is usually used in materials that have been heated and those with fillers that need to sustain suspension. The pumps can run continuously even if the material is shuf off ath the mixer.
Two-component dispensing valve - 450 XT series
The Nordson EFD offers an innovative dispense valve. This is specifically utilized...
Two-component dispensing valve - 450 XT series
The Nordson EFD offers an innovative dispense valve. This is specifically utilized for two-component urethanes. This device can withstand operation in pressures rating up to 3,500 psi 240 bar. Furthermore, if cross contamination occurs in this device, the manifold can be removed and cleaned without disassembly of the valve body.
Dispensing piston valve - 450 series
The Series 450 Autovalve is the same as the Series 400 Autovalve, except for its shut-off pistons which ensure good control of dot or shot volume. The dual piston pulls back the material...
Dispensing piston valve - 450 series
The Series 450 Autovalve is the same as the Series 400 Autovalve, except for its shut-off pistons which ensure good control of dot or shot volume. The dual piston pulls back the material from the end of the element mixing nozzle that removes the "after drool" of the device. It can be utilized as a hand-held or stationary unit.
It has an optional stainless steel valve that is suited for acerbic acrylics or epoxies. The manifold can be removed and cleaned without disassembling the valve body when cross contamination occurs. Optional pistol grip handles and a swivel base is also available. It also features a flush valve manifold that is used for cleaning the mixing nozzle with the use of air or solvent.
It has an optional stainless steel valve that is suited for acerbic acrylics or epoxies. The manifold can be removed and cleaned without disassembling the valve body when cross contamination occurs. Optional pistol grip handles and a swivel base is also available. It also features a flush valve manifold that is used for cleaning the mixing nozzle with the use of air or solvent.
Hand-operated dispensing valve - 550 LP, 560 HP series
Introducing the affordable series 550 which is a low pressure valve which is designed for operations that requires low pressure...
Hand-operated dispensing valve - 550 LP, 560 HP series
Introducing the affordable series 550 which is a low pressure valve which is designed for operations that requires low pressure measurement. This portable valve is suitable to use in allocating beads or RTM casting. Its operational mechanism is just simple. Using two ball valves, it is attached to a common lever so that they would function together simultaneously. The whole device do not allow in its system specific procedure such as feathering or attempting to meter the flow.