+7 (812) 645-08-06
Evaporators for laboratories
select brand
Laboratory concentrator / centrifugal / vacuum - 1 400 rpm | Concentrator plus series
The Concentrator plus with its new design was designed with the customer in mind to deliver an ergonomic, intuitive and durable solution that fits comfortably right on the lab bench. An advanced heating technology provides the best treatment for...
Laboratory concentrator / centrifugal / vacuum - 1 400 rpm | Concentrator plus series
The Concentrator plus with its new design was designed with the customer in mind to deliver an ergonomic, intuitive and durable solution that fits comfortably right on the lab bench. An advanced heating technology provides the best treatment for your sample which assures quick, efficient and gentle vacuum concentration of DNA/RNA, nucleotides, proteins and other liquid or wet samples. Our new coated lid provides superior chemical resistance against aggressive acids and organic solvents (e.g. TFA, DMSO).
The Concentrator plus is available with three configurations to meet the customers lab specific needs: 1) Basic concentrator for connecting to an existing vacuum pump 2) Complete system with an integrated solvent-resistant, maintenance and oil-free PTFE pump, and condensation trap 3) Complete system with vacuum port adds extra capability. It allows for using the integrated vacuum pump separately - without having to disconnect it from the system
The Concentrator plus is available with three configurations to meet the customers lab specific needs: 1) Basic concentrator for connecting to an existing vacuum pump 2) Complete system with an integrated solvent-resistant, maintenance and oil-free PTFE pump, and condensation trap 3) Complete system with vacuum port adds extra capability. It allows for using the integrated vacuum pump separately - without having to disconnect it from the system
Laboratory evaporator - 220 x 265 x 340 mm, 10.6 kg | KF
In order to facilitate sample preparation in Karl Fischer titration, the KF Evaporator is used by way of...
Laboratory evaporator - 220 x 265 x 340 mm, 10.6 kg | KF
In order to facilitate sample preparation in Karl Fischer titration, the KF Evaporator is used by way of azeotropic distillation.
Water is separated from the sample matrix, as with the oven method. The electrodes and titration vessel are not contaminated as the actual sample itself stays in the evaporation chamber. Unwanted matrix effects and side reactions are also avoided when using the KF Evaporator.
Water is separated from the sample matrix, as with the oven method. The electrodes and titration vessel are not contaminated as the actual sample itself stays in the evaporation chamber. Unwanted matrix effects and side reactions are also avoided when using the KF Evaporator.
Centrifugal concentrator / laboratory / molecular biology - 3 000 - 1 000 000 Da | Vivapin series
Vivaspin 500 centrifugal concentrators are integrated with high flux PES membrane and with high retentate recovery which ranges up to 90%. These are disposable ultrafiltration device specifically...
Centrifugal concentrator / laboratory / molecular biology - 3 000 - 1 000 000 Da | Vivapin series
Vivaspin 500 centrifugal concentrators are integrated with high flux PES membrane and with high retentate recovery which ranges up to 90%. These are disposable ultrafiltration device specifically...
Centrifugal concentrator / laboratory / molecular biology - 5 000 - 300 000 Da | Centrisart I series
The Centrisart I is a small volume centrifugal ultrafiltration unit designed to separate proteins in biological samples with low molecular weight substances. The Centrisart...
Centrifugal concentrator / laboratory / molecular biology - 5 000 - 300 000 Da | Centrisart I series
The Centrisart I is a small volume centrifugal ultrafiltration unit designed to separate proteins in biological samples with low molecular weight substances. The Centrisart I filters samples in the opposite direction of the centrifugal force, which avoids premature filter blockage. The filtered proteins are collected in the floater insert tube, and can be accessed without having to remove the tube. 90% of the original sample content can normally be ultrafiltered within about 30 minutes.
The Centrisart I works in either fixed-angle or swinging-bucket rotor functions, and can contain standard 15 ml tubes. This filtration unit is built to be ready for use.
The Centrisart I works in either fixed-angle or swinging-bucket rotor functions, and can contain standard 15 ml tubes. This filtration unit is built to be ready for use.
Centrifugal concentrator - 2 000 - 100 000 Da | Vivacon 2 series
Vivacon 2 centrifugal concentrators provide optimal performance with very dilute samples for DNA concentration...
Centrifugal concentrator - 2 000 - 100 000 Da | Vivacon 2 series
Vivacon 2 centrifugal concentrators provide optimal performance with very dilute samples for DNA concentration...